Given their higher mobility coupled with the difficult terrains they ply from time to time, the electric scooters are prone to all kinds of damages. Among these are a faulty electrical component, broken parts, perforated tires, and overwhelmed batteries.Thats why you must have sound knowledge of maintenance electric scooter.
To be guaranteed topnotch performance at any given time, you have to maintain your electric scooter in the best shape and form at all times. This can only happen if you adhere to some practices and ways. We are here to examine some seven easy ways you can follow to maintain your electric scooter.
#1: Washing the Scooter Regularly
You definitely have to wash the scooter on a regular basis. Washing prolongs the life of the scooter by eliminating dirt, debris, and other agents which may interfere with the proper functioning of the scooter as a whole.
Use mild soap so as to peel off the paints. Be mindful of the grease as well. Do not scratch the metallic parts too hard as this might also remove the paint and decorations from off the scooter. Remember also to rinse thoroughly once you are done to leave behind a sparkling clean outcome.
#2: Rotating the Tires Frequently
A typical scooter has two tires. One is at the front whereas another one is at the back. These two tires receive different pressures due to the fact that they handle different kinds of weights. The one at the back bears more weight than the one at the front.
This means that it wears out at a comparatively faster rate than the front counterpart. To ensure the uniform pace of deterioration, do rotate the tires from time to time. Do this by interchanging the front with the back tire.
#3: Furnishing The Right Pressure to the Tires
Prevention is definitely better than cure. You ought to take proactive steps to prevent your tires from wearing out too soon. This can only happen if you furnish the tire with the right pressure. Do not over-inflate the tire as it might burst easily.
Similarly, do not under-inflate the tire as it may easily sustain perforations. Only moderate tire pressure may be recommended and suitable for your use. You should also be mindful of the terrain you intend to ply as well as the prevailing external weather conditions. They too have a bearing on the amount of pressure required.
#4: Keeping The Batteries Charged
The batteries too ought to be fully and appropriately charged at all times. Too little charge will leave you hanging. You might also not complete your journey as soon as the battery dies down. It is for these reasons that you want to see to it that there is enough charge in the batteries at any given time.
Before embarking on a longer riding session, be sure to charge the battery fully. From time to time, you might also want to overhaul your battery. Lastly, putting in place a backup power source will also come in handy while on a long trip.
#5: Regular Inspection and Servicing of The Brakes
The braking mechanism is the one that brings your scooter to a complete halt. You need to work on the mechanism as well. They vary in structure, composition, and scope. Regardless of these differences though, you have to ensure that the brakes are fully functional at any given time.
If they are loose, tighten them appropriately. In case they operate on hydraulics, be sure to supply enough fluid in the system, and so on. The worst experience is one that leaves you vulnerable to all accidents in the course of duty.
#6: Lubricating The Moving Parts
With the passage of time, the moving parts of the scooters shall normally wear out as the result of intense friction and heat. You have to lubricate the moving parts to guarantee their smooth functioning and reduce the pace of wear and tear.
You should lubricate the moving parts before storage, right after retrieving the scooter from the storage facility, and before use. It is at such times that the moving parts are more vulnerable to the issue of corrosion and friction. Use only the recommended lubricant for the job.
#7: Servicing The Electrical Components
Lastly, you have to service the electrical components of the scooter from time to time as well. You have to pay keen attention to the power supply mechanism, electrical connections, and the entire circuit. It is these that form the core of the transmission mechanism of the scooter.
While at it, be on the lookout for any damages or broken connections. Solder the broken connections to restore the connectivity. If in doubt, bring in an expert to help you out. Never attempt to gamble as any negligence may often attract dire repercussions.
Read Also : Clean Scooter Ceramic Bearings
Maintaining an electric scooter is no mean feat from the foregoing discussions. As you may have already deduced, the procedures are intricate and as such require some mastery of the relevant technical expertise. It is for these reasons that you are strongly urged to bring in an expert to handle the job. The last thing you might want is to endanger yourself as a result of substandard work.
Last Updated on by landroverbar